1. The heat transfer oil produced by the mold temperature controller circulates in the hot plate channel of the hot press, so that the temperature of the hot plate rises to the process requirements and maintains the temperature. The roller brush and the compressed air pipeline clean the rubber blocks and debris

2. The pre-made square cabin panels are placed on the feed belt conveyor. The feed belt conveyor and the high-temperature resistant Teflon conveyor belt of the hot press move at the same speed, and the square cabin panels are sent to the hot press.

3. The upper hot plate of the hot press press is pressed down to close, pressurize, and maintain pressure. The adhesive in the square cabin panel is solidified under the action of temperature and pressure, and all the components of the square cabin panel are firmly bonded together to form a whole plate. When the pressure holding time is up, the hot press automatically releases pressure and returns.

4. The Teflon conveyor belt in the hot press moves in the same direction and speed as the discharge roller conveyor, and the pressed square cabin panels are sent to the discharge roller conveyor.

5. As the above cycle, the production line will continuously produce high-quality square cabin panels.